QSC KW153 Active 3 Way PA Speaker, 1000 Watt
QSC KW153 Active 3 Way PA Speaker, 1000 WattDetails
Product Ref: 21151View Full Description
Full DescriptionView Full Description
Like K Series, each of the four KW Series models features a QSC designed, 1000 watt (2 x 500 W continuous) Class D power module. And continuing in the K Series tradition, every model is fitted with the identical high-output 1.75" HF device (full-range models) and woofers of the same high quality design, regardless of speaker size.
Defined Coverage Area
Directivity Matched Transition (DMT™) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
KW Series features a four-position mic / line gain switch that allows for connection of a wide variety of devices. Combo XLR and 1/4" TRS inputs accept both mic and line level input while a set of RCA phono inputs (except KW181) allow additional connectivity to portable MP3 players, CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for "daisy-chaining" of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility.
On-board switches provide preset EQ settings. The HF setting (full-range models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP™ for additional bass extension, or EXT SUB (full-range models) for use with an external subwoofer. The rear panel LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.
The KW122 and KW152 feature a unique Tilt-Direct™ pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired.
Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Phoenix-Style connector. In an installed application, multiple KW Series speakers can be "daisy-chained" for total gain control from a single remote pot. Auto-standby mode is engaged after 5 minutes of inactivity.
KW Series is designed to withstand the rigors of professional use. Advanced construction processes, premium-grade Baltic birch cabinetry, ergonomic, cast aluminium handles, low-noise casters (KW181) and a highly protective steel grille provide for ease of transport and long term durability. Integrated M10 suspension points allow for flown applications with a KW M10 KIT (sold separately) and a threaded pole receptacle (KW181) provides for a positive, wobble free connection to a threaded speaker pole (included).
- 15" Woofer; 6.5" midrange woofer; 1.75" diaphragm compression driver
- 75° Nominal coverage angle
- Maximum SPL 134 dB peak
- 1000-watt Class D power modules in all models (2 x 500 W continuous)
- Onboard mixer with two combo XLR and ¼" inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
- Extensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performance
- DMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound field
- Rugged, texture-painted birch enclosures
- Four-position Mic/Line gain (full-range models)
- Tour-grade 16 gauge steel grilles
- Comfortable ergonomic handles
- 35 mm pole sockets with Tilt-Direct™
- M10 rigging points for suspended installation
Extensive DSP enhances system performance
- DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
- Intrinsic Correction™, first featured in our high-end line-array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
- DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
- GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
- Configuration: 15" 2-way multipurpose
- Transducers: 15" cone transducer, 1.75" diaphragm compression driver
- Frequency Response (-6 dB): 47Hz - 18kHz
- Frequency Range (-10 dB): 44Hz - 20kHz
- Nominal Coverage (-6 dB): 60° axisymmetric
- Maximum SPL: 133 dB peak
- Power Output: 1000W Class D (500W LF, 500W HF) continuous, 2000W peak
- Controls: Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
- Indicators: Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)
- Connectors: Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
- Cooling: On demand, 50 mm variable speed fan
- Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
- Transducer Protection: Thermal limiting, excursion limiting
- AC Power Input: Universal power supply 100-240 VAC, 50 to 60 Hz
- AC Power Consumption (1/8 Power):
- 100 VAC, 2.3 A
- 120 VAC, 2.01 A
- 230 VAC, 1.13 A
- Channel A (0dB gain): 38kΩ balanced, 19kΩ unbalanced
- Channel A (+12dB gain): 10kΩ balanced, 5kΩ unbalanced
- Channel A (+24dB gain): 2.66kΩ balanced, 1.33kΩ unbalanced
- Channel A (+36dB gain: 660Ω balanced, 330Ω unbalanced
- Channel B XLR/¼" 38kΩ balanced, 19kΩ unbalanced
- Channel B RCA: 10kΩ
- Material: 15mm painted birch plywood
- Finish: Black textured paint
- Grille: Black powder coated 16 gauge steel
- Dimensions: 43.1" x 18.5" x 16.8" 1094 mm x 470 mm x 427 mm
The product price includes 3 years' warranty and 30 day money back guarantee.
However, the Gear4music extended warranty scheme provides an enhanced service, and is designed to offer a higher level of protection than many 'free' warranties offered by some retailers and manufacturers.
The highlights of this enhanced warranty service are:
- Warranty is extended to 6 years from the date of delivery.
- Our Money Back guarantee is extended from 30 days to 180 days (terms apply after 30 days)
- Collection and delivery costs are included for the first 2 years
- Claim 50% cash back on the cost of the policy after 6 years if it has not been used!
- Warranty is transferable if the item is re-sold
- Loan or replacement equipment will be provided if the product isn't repaired within 30 days
- If an item can not be repaired, a similar alternative product or cash discount (as defined in this policy) will be offered
- The policy can be cancelled within 30 days, and at any time after that for a pro-rata discount
Please note that this extended warranty is currently only available on products sold within the EU or EEA, and is subject to the terms and conditions as detailed on the extended warranty certificate provided.
For customers in outlying areas of the country, the price of the Extended Warranty may be marginally higher, due to the potential for higher collection and redelivery transport costs.
This enhanced warranty is in addition to the standard Gear4music and manufacturer warranty policies, and the Gear4music terms and conditions of trade. No statement or condition of sale contained within these terms affects or restricts your statutory rights as defined under the Consumer Contracts Regulation 2014.
Once the product is delivered, you have 30 days to decide that you definitely want to keep it. If you decide it is not suitable for any reason, you can return it back to us for replacement or full refund, including standard delivery charges.
All Products are new unless stated, and include a minimum of 3 years warranty.
Some items are only eligible for money back guarantee if they are returned to us unused and sealed in the original packaging, and in the case of software, unregistered. These items include:
- CDs & DVDs
- In-ear Monitors
- Earplugs and Ear Protection
- Mouthpieces, Reeds etc… for Woodwind and Brass instruments
- Mouth / Lip Care Products
We are unable to accept returns of any custom made items designed to work together as a unique package, such as computer system built to a customer’s personal specifications. Exceptions may only be possible with prior agreement of the vendor, and may be subject to a cancellation fee.
If you also purchase items that do not qualify for free delivery, some delivery charges may be applied to your order which will be shown in your shopping basket.