Key Features
- High performance fog machine that provides optimum output for a full atmospheric effect
- LED indicator allows you to clearly and accurately monitor the status of the machine
- Automatic circuit cut-off if the fog fluid tank runs dry to protect the pump
- Various mounting options and carrying handle for efficient transport and setting up
ADJ Fog Fury 3000 Fog Machine Overview
The Fog Fury 3000 Fog Machine is a high-output fog machine with professional features and a compact, portable design. It creates fog that is both an impressive visual effect on its own, and a great way to enhance the visibility of your lights and lasers.
The Fog Fury 3000's high-performance pump produces an output of 21,000 cubic feet of fog per minute, so it will fill even the largest venues with fog. You can control it with ease too, with an included wired remote, and built-in DMX control allowing for integration into your lighting rig. And with a single yoke, you can easily mount it to a wall or section of truss.
Product Ref: 80554
Full Description
View Full DescriptionDon't worry about a thing
The Fog Fury 3000 has everything you need for the perfect fog effect. Boasting a high performance pump, this unit only gives you optimum output. Making sure that you will have the fullest effect for your show. And it only takes 8 minutes to warm up so you're good to go in no time. Featuring ADJ’s Electronic Thermo Sensing (ETS) technology, it will maintain optimum heat levels with no warm-up times between fog blasts to ensure an even output when you need it. It also has automatic circuit cut-off to protect the pump if the fog fluid tank runs dry and uses an oil type transmission pipeline system to minimize the possibility of clogging.
User-friendly design
As a DMX fog machine, you'll be able to easily integrate the Fog Fury 3000 into your entire entertainment production and easily manage it with a DMX controller. An LED heating indicator also provides visual feedback for the status of your fog: with red indicating that it's heating; green showing that it is ready to use; and flashing letting you know that fog fluid is low. This makes it easy to manage and monitor the condition of your machine to ensure a steady and fluid output for your entire show.Features
- 1500W professional DMX Fog Machine
- High performance pump for optimum output
- ADJ’s Electronic Thermo Sensing (ETS) technology to always maintain optimum heat levels with no warm-up times between fog blasts
- Automatic circuit cut-off to protect pump if fog fluid tank runs dry
- Special heating element design that uses an oil type transmission pipeline system to minimize the possibility clogging
- LED heating indicator system in tank: Red = Heating; Green = Ready to use; Flashing = Fog fluid tank is low
- 3 Operational modes: Manual, Timer Mode, or DMX Controlled
- 3 DMX Channels
- 3-button DMX LCD display on rear panel
- 3-pin DMX XLR In/Out connections
- Single yoke to mount on a wall or from trussing bracket
- Convenient carrying handle
- Only use high quality, water-based fog fluid
Specifications
- Voltage: 120v or 230V, 50/60Hz
- Heater: 1500w
- Power Consumption: 1600w
- Weight: 25 Lbs. / 11.28 Kgs
- Dimensions: 18.75" x 13.75'' x 12.75'' / 475mm x 345mm x 321mm
- Fuse: 20A (120V) / 10A (230V)
- Warm Up Time: 8 Minutes
- Tank Capacity: 5 Liter
- Output: 21000 Cubic Feet Per Minute
- Fluid Type: Water Base Adj Fog Juice
- DMX Channels: 3 Channels
- Duty Cycle: Not To Exceed 6 Hours Turned On
Note
This ADJ effects machine should only be used with ADJ fluid. All maintenance must be carried out as per ADJ's instructions. Failure to do so may invalidate the manufacturer’s warranty. Please refer to the user manual here for further information.
| Reviews of our service
View all
