DISC Aviom 6416m 16 Channel Remote Controllable Input Module

Full Description

Take full control

You can control multiple settings using either the intuitively design front panel or with RCI or MCS mic control surface controllers. This gives you a lot of scope for controlling your Aviom 6416m wherever you are in the venue. You can use the controller interface to recall up to 16 presets on the preamps - you're sound is always the best it can be throughout the show.

There is also a lot of options for connectivity across the 6416m. It features XLR jacks and DB25 which works for inputs as well as passive splits. The unit also includes input and output for Aviom's virtual data cables. VDCs can be used to send and receive non-audio data like MIDI In, MIDI Out, RS232, and GPIO.

Features

• 16 state-of-the-art mic-level inputs (XLR)
• Passive splitter/alternate input (two DB25s)
• Continuously variable gain, phase, low cut filter, pad, and +48V phantom power per channel
• Remote controllable over A-Net with the RCI Remote Control Interface and MCS Mic Control Surface combination or from select Yamaha consoles, using m-control™
• Remote controllable via Pro64 Network Manager software

Specifications

• Inputs: 16 channels; XLR
• Passive Split/ Alternate Inputs: DB25 multipin; analog audio pinout
• Differential Input Impedance: 3.6k ohms
• Input Gain Range: 0-55dB, variable, in 1dB increments
• Maximum Input Level: 0dB gain, Pad on = +24dBu
• 0dB gain, Pad off = 0dBu
• 55dB gain, Pad on = -31dBu
• 55dB gain, Pad off = -55dBu
• Minimum Input Level for 0dBFS @ maximum gain: Pad on = -31dBu Pad off = -55dBu
• Pad: -24dB, switchable per channel
• Low Cut Filter: -3dB @85Hz, -18dB per octave; per channel
• Phantom Power: +48 volts; per channel
• Preset Memory: 16; saves all channel strip audio parameters
• Sample Rates:
• 1x: 39.7-52kHz
• 2x: 79.4-104kHz
• 4x: 158.8-208kHz
Frequency Response:
• +/- 0.3dB 20-23kHz at 48kHz
• +/- 0.3dB 20-45kHz at 96kHz
• +/- 0.3dB 20-53kHz at 192kHz
• -3dB @ 2Hz (at all sample rates)
• A/D Converters: 24 bit
• THD+N: 0.0015% @1.0kHz, -10dBFS 0.007% @ 1.0kHz, -1dBFS
• Dynamic Range (noise floor): 112dB
• Crosstalk: -110dB @1kHz. 35dB gain
• Equivalent Input Noise (EIN): -127dBu
• CMMR: 78dB @ 1.0kHz / 75dB @ 10kHz typical
• A-Net: Two Category 5 (EtherCon RJ45 connectors)
• Latency: Analog input to analog output:
• A-Net Cable Length: 400 feet (120 meters) between devices
• Virtual Data Cables:
• MIDI In
• MIDI Out
• 5-pin DIN
• RS-232
• DB9 connector
• DIP switch configuration
• GPIO In (x4)
• DIP switch configuration
• Power Supply: Internal, universal switching type; standard IEC cable provided
• Voltage: 100-240VAC, 50-60Hz, 55W
• Backup Power:
  • 4-pin XLR; 24 Volt DC
  • Pin 1 = Ground
  • Pin 2/3 no connect
  • Pin 4 24VDC
• Dimensions: (3U) 19" wide x 12" deep x 5.25" high (482.6 x 304.8 x 133 .3 mm)
• Weight: 15 lb. (6.80 kg)
• Maximum Ambient Operating Temperature: +50°C