Full Description
View Full Description
Benidub Spring Amp III
Advanced spring reverb preamplification
The core of the Spring Amp III lies in its specialised reverb preamplifier design. Using a discrete transistor front-end, the amplifier ensures an ultra-low noise figure and pristine sound capture from your reverb tank. It is paired with a robust 7.5W constant current amplifier optimised for 8-ohm input tanks, pushing the springs to their full potential with extended treble response and impressive output volume. This setup delivers dynamic, clear, and highly mussical spring reverb tones that retain the organic texture and lively character that define classic dub and experimental sounds.
Built-in filter with crossfader control
The inbuilt analog filter offers extensive tonal shaping options with a 12dB per octave slope. Featuring a continuous crossfade between high-pass and low-pass outputs, the filter provides rich modulation opportunities. You can easily sweep from bright, piercing highs to deep, resonant lows, sculpting the reverb’s decay and character in real time. A routing switch allows you to decide if the filter processes the sound before or after the spring tank, offering two distinct tonal approaches: mellow and harmonically rich or dramatic and splashy.
Soft clip saturation for warm analog tone
Spring Amp III features an integrated soft clipper on both the input and filter stages. This addition means you can push signals into gentle saturation without unwanted distortion artifacts or damaging your speakers. The resulting sound is thick, warm, and full of harmonic complexity, adding an expressive edge to your dub swells, rhythmic hits, and ambient washes. The soft clipping works seamlessly across the unit's dynamic range, making it highly playable for hands-on performance techniques.
Independent filter and preamp controls
Independent volume controls for both the preamplifier and the filter sections grant significant flexibility. This configuration allows the Spring Amp III to be used not only as a spring reverb driver but also as a standalone analog filter unit, ideal for creative signal processing or live improvisation. Connect it directly after an instrument, a mixer, or a studio interface to add lush filtering and saturation to any sound source, expanding its usability well beyond traditional spring reverb applications.
A legacy of passion and refinement
The Spring Amp III represents years of passion and continuous improvement from Benidub, refined through hands-on experience and invaluable user feedback. It carries forward the spirit of classic dub effects while pushing forward into new creative possibilities. With its intuitive layout, top-tier audio fidelity, and inspiring hands-on controls, the Spring Amp III is not just another reverb accessory – it is a performance instrument in its own right, designed for artists who want their effects to be as dynamic and alive as their music.
TAD Type-4 Spring Reverb Tank
Gives you the classic reverb character
The TAD Type-4 delivers the sound made famous by vintage amplifiers. Its long chassis and four counter-wound springs produce a dark, smooth reverb with rich sustain and a wide frequency range. This makes it ideal for anyone looking to replicate that iconic early 60s amp tone in a modern or restored setup.
Durable construction with quality materials
A rugged aluminium tray secures the custom-wound input and output transducers, maintaining clean signal transfer. Internal wires are fitted with stress relief to reduce failure over time. Soft grommets help isolate the tank from cabinet vibrations, protecting the reverb effect and improving stability.
Drop-in ready for a wide range of amps
The Type-4 comes with standard RCA connectors (white input, red output) and multiple mounting holes for flexible installation. This makes it compatible with a broad range of classic and modern amp layouts, and well suited for both upgrades and replacements.
Made to perform and built to last
Developed as a high-quality alternative after Accutronics ceased production, the Type-4 captures the essential features of those early tanks while offering improved reliability. The hammertone finish, mechanical design and tonal quality work together to deliver dependable performance for regular use on stage or in the studio.
Features
Benidub Spring Amp III
- Dedicated spring reverb preamplifier optimized for external reverb tanks
- Integrated 12dB/oct analog filter with continuous high-pass to low-pass crossfader
- Soft clip saturation on input and filter stages for warm, musical drive
- Low-noise discrete transistor amplification with Class-A components for studio-grade sound
- Independent volume controls for filter and preamp sections for flexible signal routing
- Switchable routing to place filter pre- or post-spring reverb for different tonal effects
- 7.5W constant current amplifier designed for maximum treble response and output clarity
- Compact, rugged desktop design ideal for live performance and studio use
- Clickless switching and robust construction for seamless integration into demanding setups
- Developed through years of refinement, blending classic dub aesthetics with modern versatility
TAD Type-4 Spring Reverb Tank
- Long-decay springy-style reverb with rich tone
- Dark, subaqueous sound ideal for classic amp fans
- Four counter-wound springs for added clarity
- Fits standard amp layouts with RCA connectors
- Built to last with rugged metal chassis and smart mounting
Specifications
Benidub Spring Amp III
- Power Input: 12VDC, 1A, Center Positive, 2.1 mm × 5.5 mm Barrel Connector
- Audio Input/Output: 1/4” Balanced Or Unbalanced Mono Jack. Balanced Connection Improves The Signal-To-Noise Ratio
- Gain: Sets The Input Amplifier Gain, From Unity Gain To Overdrive
- Cutoff: Sets The Filter’s Cutoff Frequency
- Resonance: Sets The Amount Of Filter’s Resonance
- LFO Wave: Switches Between 6 Different LFO Waveforms
- Spring Tank Connections: 1/4” Unbalanced Mono Jack To RCA
- Reverb Volume: Sets The Spring Reverb Volume
- Dry To Filter: Sets The Amount Of Dry Signal That, After Being Filtered, Is Added To The Unit’s Output
- Pre/Post Springs: Click-Less Switch To Change The Spring Signal Routing, Allowing For The Filter To Be Placed Before Or After The Spring Tank
- LPF/HPF: Crossfade Between HP And LP Filter Outputs
- LFO Rate/Depth: Dedicated Controls To Set The Filter’s Cutoff Modulation Speed And Amount
- Product Code: SPRING-AMP-III
TAD Type-4 Spring Reverb Tank
- Outer Channel Dimensions (L x W x H): 42.5 cm × 11.1 cm × 3.3 cm
- Product Code: TAD-T4